Your existing test frame electronics and computer boards known as ADC
uses an ISA computer slot that is no longer supported by most computer
manufacturers. Instru-Met can and will support these systems with
our inventory of parts and computers.
For more
detailed information regarding this issue, click
here.
Upgrade
Tips
There are many types of frame,
electronic and software upgrades available. Consider having your
upgrades done at the time of routine service and calibration. This
will save the expense of a separate site visit to install the
upgrade. A typical electronic upgrade or hardware upgrade should
include all device verifications as well as crosshead speed and
displacement verification. This will not only test the devices but
will also ensure proper operation of the test frame to load. Having
samples available at this time is also helpful to check the systems.
Service
Tips
We have found during the many
rebuilds that we have done on all types of material testing machines
that one thing seems to be common. The grease used on the screws and
guide system is usually dried up and hard or sticky. It is important
to maintain your test frame the way it was meant to be, it is a
precision instrument and needs routine maintenance. The life of the
drive system is dependent on the lubrication that it receives. Since
these systems are not self lubricating they need to be lubricated
during a preventative maintenance visit. The mechanics in these
frames have metal on metal bearing surfaces and need proper
lubrication. Call us now to schedule a visit.
|